Mikrotik low cost molded Passive POE Injector for use with RB/133, RB/133C, RB/150, RB/192, RB/230, RB/333, RB/411, RB/411A, RB411AH, RB/433, RB/433AH, RB/450, RB/493, RB/532, RB/532a, RB/600A. Use with a standard DC power supply to provide POE on unused pairs. Takes standard 2.1mm DC plug.
Please note: This is a passive POE injector, the output loss of voltage will be lower than the original supply voltage, the actual situation will decide according to mesh wire's length. We suggested you use 24V the power source, if you use is Mikrotik RouterBOARD.
© Copyright 2018 Sperbat Da Corporation. All Rights Reserved