The cable kits is made of high-quality shielding wire, replicates the original Tesla Model S Amphenol Fakra plugs and jacks.
Connects front and rear cameras to custom PCB then to touchscreen. For Tesla Model S only.
This Tesla Front Canera Cable kits was used for the Front/Rear Camera Touchscreen Switch Kit which was developed by two Model S owners with input from the members of TMC.
This Tesla Front Canera Switch Kit includes the PCB switch itself, mounted in a plastic case, with all components to make it operational, including a wireless remote control that can synced with HomeLink, so switching from rear to front view can be done with via the touch screen. The kit also includes an OBD2 connector that offers a simple way to provide the necessary 12v power and ground connections to the switch.
The cable kit set to connect the front and rear cameras to the PCB switch and the PCB switch to the touchscreen.
one long cable (300cm cable) for connecting the front camera to the switch and two short cables (30cm) for connecting the rear camera to the switch and the switch to the touchscreen cable.
The photos show a hand-lettered prototype for the PCB switch case:
It should be assemblied like this:
2pcs Pigtail cable Fakra female to Fakra female straight 4pole, Dacar 535 cable, 4 pole, 30cm long, for bridge connection of rear camera to custom PCB and PCB to touch screen with 30cm
If you'd like the long 300cm cable and short 30cm cable are purchased separately
The list of the long 300cm cable
The list of the short 30cm cable
The Tesla Front Camera cable kit is sold on Aamzon,available on Amazon USA warehouse next month (May).
You can purchase the cable kits there to get it in the next day after your payment.
The list: http://www.amazon.com/Superbat-Fakra-cable-Tesla-Camera/dp/B00JUNGQTM
The two ends of Fakra Female connector is exactly the same as conectors as showed in the picture,and it has special way to make the cables!
More information from Teslaclub:
How it will be if the Front/Rear Camera Touchscreen Switch Kit is installed.
When the kit is installed it provides the same high-definition view on the touchscreen for the front of the car that is provided for the rear of the car by the rear camera. With a Tesla rear camera mounted in the front of the car, the switch makes it possible to switch from rear to front view when parking your Model S. The front view has the same wide angle of sight as the rear camera and the same high-definition resolution.
With a camera mounted on the front of the car the switch will obviate the need for front parking sensors, as a driver will be able to see on the touchscreen any obstacles that might damage the front bumper or any other part of the front of the Model S. The kit is ideal for owners who bought cars prior to the time the Tesla parking sensors were available as well as those who would like to have an extra measure of protection beyond that provided by the parking sensors. The switch in operation on the touchscreen is showed on teslamotorsclub :
We custom all the RF custom cables as customers' requirements